Description
Vintage RCBS Green Machine inline progressive reloading press which was set up in .45 acp. The original owner made some modifications to it including upgrading to a Uniflow powder measure, tube primer feed, 8 ball handle and brass loading tubes. I t's out of adjustment or needs some TLC. Case advance is off a bit and it's not centering over the primer seater nor is it fully advancing the piece of brass I tested it with. Possibly the case holder bars are out as well. Case advance arm will jam if that lower adjuster bolt turns sideways. Powder measure is not actuating but maybe it needs brass to dump? The primer tube is very close to the new powder measure, not sure if there is a conflict when working the press. The case feed has a broken bottom plastic tube retainer and missing the top one. Plastic powder hopper has a crack but RCBS still has these available. Lee carbide sizing die and a Lyman seating die. Press #01252. You will need to disassemble, clean, lube and adjust to get it up and running. I will be listing more of these in the near future but different calibers .45 Colt, .44 Special/Magnum, .38 S&W, 9mm, and .357 Magnum. Please refer to images. This press is very heavy, in excess of 30 lbs. and will be partially disassembled for shipping which will be two insured Priority mail boxes. Pickup is an option but not listed on the shipment methods. Please feel free to discuss before purchase. Glad to combine freight when possible, please message me prior to paying for an invoice with combined freight amount. USA shipping only. Message any questions or for more images. Thanks for looking!